 |
    |
 |
 |
GUIDANCE
AND ADVICE - RECOMMENDED METHODS
|
| |
|
| |
The
information in these pages is provided to give guidance
on various techniques not usually identified with a specific
standard. These are recommended practices that will result
in reliable products. They are not, however, intended
to be hard requirements, assumed to be supplemental to
existing standards, or judged as the only acceptable method
that can be used for the particular topic. For each topic
covered herein, there can be several other techniques
or procedures not described that can provide equivalent
reliability, and their use should not be discouraged because
they're not included in these pages.
This information should not be used if it conflicts with
any contractual or program-specific requirements. Unless
otherwise specified, these pages fall in order of precedence
behind the contract, approved drawings, and any standards
imposed on the program.
All diagrams and visual aids included in this
section are intended to provide insight to certified
operators, inspectors and instructors who visually
assess the compliance of flight hardware with this
standard.
Splicing
|
|
|
|
