 |
 |
VOLUNTARY
CONSENSUS STANDARDS
|
| |
|
| |
NASA
has adopted several electronic assembly manufacturing, material, and
workmanship voluntary consensus standards, and the NASA Workmanship
Technical Committee (NWTC) is actively working on others to be considered
for NASA adoption. If you know the specific standard you’re interested
in, the easiest way to start is by going to the NASA Technical Standards
Program (NTSP) web page at http://standards.nasa.gov.
This site will allow you to do a search by document number, title,
or responsible VCS organization. If you have any comments (e.g., specific
application issues or lessons learned) you should send them to the
NASA Participant shown in the NTSP web page for that particular VCS.
If you have comments concerning a VCS not listed on the NTSP web page,
or for specific topics for which you can’t find a VCS or NASA Technical
Standard, send them to the NWTC.
A representative from this committee will respond to assist you. |
| |
| |
|
|
|
| STANDARD
# |
TITLE |
REV |
EFF.
DATE |
|
ANSI/ESD S20.20-2007 |
Protection
of Electrical and Electronic Parts, Assemblies and Equipment
(Excluding Electrically Initiated Explosive Devices) |
2007 |
2/07 |
| IPC-A-600 |
Guidelines
for Acceptability of Printed Boards |
F |
11/99 |
| IPC-2221 |
Generic
Standard on Printed Wiring Board Design |
Initial
Release |
2/98 |
| IPC-2222 |
Sectional Standard on Rigid Printed Wiring Board Design |
Initial
Release |
2/98 |
| IPC-6011 |
Generic
Performance Specifications for Printed Boards |
Initial
Release |
7/96 |
| IPC-6012 |
Qualification
and Performance Specification for Rigid Printed Boards |
A |
10/99 |
|
J-STD-001DS |
Requirements
for Soldered Electrical and Electronic Assemblies |
D |
11/06 |
| J-STD-004 |
Requirements
for Soldering Fluxes |
Amndmt.1
|
4/96 |
| J-STD-005 |
Requirements
for Soldering Paste |
Amndmt.1 |
1/95 |
| J-STD-006 |
Requirements
for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed
Solid Solders for Electonic Soldering Applications |
Amndmt.1 |
6/96 |
|
|
